Best Selling Products

Height 4.6" x 2.3" x 3.05" “Hoot hoot” Now what could a prince of hell possibly want? Oh wait, how about a Youtooz debut! At 4.6 inches tall with thick dark plumage fanning out from their white face that has deep red eyes and a short sharp beak, their thick dark feathers sweep out to rest either side of his majestic top hat which is embellished with a gold crown. With a high white collar and shoulder caps, he raises one hand up to his ruffled collar as the other faces outward nonchalantly as a long red cloak hangs down over a red tunic with golden buttons and their feathered tail. The exterior of their packaging sees a burning silhouette against a dark background, while the interior surrounds them entirely in maroon stripes that are reminiscent of dirty wallpaper. The protective sleeve is then patterned with diagonal black and white stripes and printed with the ‘Helluva Boss’ logo as their figure can be seen through the large clear display window at its front. This collectible ships in a matte, embossed, protective outer sleeve and a custom-sized plastic protector for maximum protection during shipping.  

Read more less

Vivziepop Store  Pins are approximately 1 in wide. Enamel material.   *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Design by GasuGuma. Vivziepop Store 3D Lenticular Poster 11.5"x15.5" size.   Lenticular Posters are shipped separately from other products to prevent damage. 

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:   Human Loona Octavia Stolas Verosika Cards come in a folding card pack. Cards measure 2" by 3.5" Design by par0llel.

Read more less

Pins are approximately 1 in wide. Enamel material.  Design by gigaseraph. *Pin images simulated, final pin design/colors might be slightly different than product image.*

Read more less

Design by Lavendarice Pins are approximately 1.5 in tall. Enamel material.  *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Design by LudoDoodle  Vivziepop Store  Standee is ~ 1.5" x 4.75" x  4.875"  *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Design by CyberCyber Pins are approximately 1.5 inch tall. Enamel material. Limit 3 per customer

Read more less

**THIS ITEM IS ON PRE-ORDER** ITEM IS STILL IN PRODUCTION. EXPECTED TO ARRIVE LATE APRIL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by Voidseeker Limit 3 per customer 3 in. acrylic keychains. *NOTE* There is a protective film wrap that can be removed.

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Stolas Verosika Octavia Human Loona Cards come in a folding card pack. Cards measure 2" by 3.5" Design by GasuGuma.

Read more less

Set of 4 vinyl waterproof die-cut stickers. Featuring, Octavia, Human Loona, Stolas, and Verosika.  Approx. 4.5" tall each. Design by Pandaleafs. Vivziepop Store

Read more less

Design by hntrgurl13  Vivziepop Store  Standee is approx. 6.5" x 1.375" x 5.25" when assembled. *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

80 unlined pages.  Size: 6in x 8.5 in Vivziepop Store  

Read more less

Design by GasuGuma, title art by IdentityPollution. *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Design by Andrea Sizing Charts

Read more less

Design by GasuGuma. Printed on 18"x 24" Poster Paper. Posters are shipped separately from other products to prevent damage. 

Read more less

Pins are approximately 1.5 inches. Hard Enamel and printed flames.  Design by calmoray. *Pin images simulated, final pin design/colors might be slightly different than product image.*

Read more less

**THIS ITEM IS ON PRE-ORDER** ITEM IS STILL IN PRODUCTION. EXPECTED TO ARRIVE LATE APRIL. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Limit 3 per customerDesign by Kanomareki *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling it towards you. The protective film is intentionally difficult to remove and may require some force during removal. Character is double-sided.  

Read more less

**THIS ITEM IS ON PRE-ORDER** THIS IS FOR A SECOND WAVE OF THIS ITEM. PLEASE ALLOW 4 MONTH FOR PRODUCTION.  NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Limit 3 per customer Design by Kain Pins are approximately 1 in wide. Enamel material. 

Read more less

Design by zllm6. Vivziepop Store Pants has pockets and drawstring!  Printed on 95% cotton/ 5% spandex.  

Read more less

Large size socks and will fit most. Measured at approx. 16in tall x 3in wide. Might shrink in first wash.  Socks are 65% Cotton, 3% Spandex, 32% Polyester. Wash with Dark Colors separately.  Design by MAMETCHI.  VivziePop Store

Read more less

Pins are approximately 1.5 inches. Hard Enamel material.  Design by calmoray. *Pin images simulated, final pin design/colors might be slightly different than product image.*

Read more less

Design by GasuGuma. Printed on 18"x 24" Poster Paper. Posters are shipped separately from other products to prevent damage. 

Read more less

Pins are approximately 1.2 x 1.7 inches. Antique die-struck pin with hard enamel material.  Design by par0llel.

Read more less

Design by hntrgurl13  Vivziepop Store  Standee is approx. 5" x 1.75" x 5" when assembled. *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Stolas Blitz Striker Loona Cards come in a folding card pack. Cards measure 2" by 3.5" Design by GasuGuma.

Read more less

Design by Sera Pins are approximately 1 in wide. Enamel material.  *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Set of 6 vinyl waterproof die-cut stickers. Range from approx. 3" wide to 3.5" tall. 6 summer scenes! Featuring  Loona Moxxie and Millie Chaz Stolas and Blitz Octavia Verosika Design by NoodleBowl_Pop. Vivziepop Store

Read more less

Pendant is approx. 1.25 inches. Zinc alloy material. 21 inch necklace length with 2 inch extender.  *Final design and materials might be slightly different than what is shown.*

Read more less

Four double-sided metal cards featuring the IMP logo on the back and the following characters:  Verosika Stolas Octavia Human Loona Cards are Silver with Gold accents and come in a folding card pack. Cards measure 2" by 3.5" Design by Par0lllel

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Octavia Stolas Human Loona Verosika Cards come in a folding card pack. Cards measure 2" by 3.5" Design by Par0lllel

Read more less

**THIS ITEM IS ON PRE-ORDER** THIS IS FOR A SECOND WAVE OF THIS ITEM. PLEASE ALLOW 4 MONTH FOR PRODUCTION.  NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Limit 3 per customer Design by MistMistly Pins is approximately 3.5 in wide. Enamel and glitter material. 

Read more less

Design by KStone Dimensions - 12" x 11" Plush Material - Polyester Adult Collectible; not a toy. Recommended for ages 16+ Not for children under 3 years of age. Small Parts, choking hazard. 

Read more less

Design by Mist Mistly *NOTE* There is a protective film wrap that can be removed.

Read more less