All

Design by Sera Pins are approximately 1 in wide. Enamel material. 

Read more less

 Pins are approximately 1.5 in tall. Hard Enamel Material.  Design by hntrgurl13. *Pin images simulated, final pin design/colors might be slightly different than product image.*

Read more less

Design by Kanomareki *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal. Image provided is a digital mockup, may not represent the final design, colors, or product

Read more less

Pins are approximately 1.5 in tall. Hard enamel material.  Design by calmoray. *Pin images simulated, final pin design/colors might be slightly different than product image.*

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Stolas Blitz Loona Striker Cards come in a folding card pack. Cards measure 2" by 3.5" Design by GasuGuma.

Read more less

Design by Disaster Lady *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Design by Kanomareki *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling it towards you. The protective film is intentionally difficult to remove and may require some force during removal.Limit 3 per customer

Read more less

Design by GasuGuma. Printed on 18"x 24" Poster Paper. Posters are shipped separately from other products to prevent damage. 

Read more less

Set of 4 vinyl decals.  Design by MistMistly The stickers are white with a transparent outline. DO NOT TRY TO REMOVE THE TRANSPARENT BACKGROUND. That is part of the sticker. 

Read more less

Design by GasuGuma. Printed on 18"x 24" Poster Paper. Posters are shipped separately from other products to prevent damage. 

Read more less

Design by KStone Dimensions - 12" x 12.5" Plush Material - Polyester Adult Collectible; not a toy. Recommended for ages 16+ Not for children under 3 years of age. Small Parts, choking hazard. 

Read more less

Design by Kain Pins are approximately 1 in wide. Dangling pin.  

Read more less

Pins are approximately 1.5 in tall. Enamel material.   *Final pin design/colors might be slightly different than product image.

Read more less

Four double-sided metal cards featuring the IMP logo on the back and the following characters:  Stolas Loona Blitz Moxxie & Millie Cards come in a folding card pack. Cards measure 2.5" by 3.5" Design by Par0lllel

Read more less

Design by Kanomareki Sizing Charts

Read more less

Character Design by MistMistly, Design by SpindleHorse *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling it towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

100% Polyester. Design by Circlehead PULLOVER HOODIE Sizing Chart:   

Read more less

Design by DisasterLady Pins are approximately 1.5 inch tall. Enamel material.  *Pin images simulated, final pin design/colors will be slightly different than product image.*

Read more less

Design by Kain. Pins are approximately 1.5 inch tall. Enamel material.  *Pin images simulated, final pin design/colors might be slightly different than product image.

Read more less

Design by MistMistly Double-sided 3 in. acrylic keychain. *NOTE* There is a protective film wrap that can be removed.

Read more less

Limit 3 per customer Design by Kain Pins is approximately 3.5 in wide. Enamel and glitter material. 

Read more less

Design by Mist Mistly *NOTE* There is a protective film wrap that can be removed.

Read more less

Design by ZLLM 15.7 in x 23.6 in

Read more less

Hardshell switch carrying case. Material is EVA and PU.  Dimensions 10.5" x 5" x 1.675"  Case has 2 zippers, upper elastic mesh pocket, 10 gamecard pockets, and double elastic bands to hold in console.  Design by Circleheadd

Read more less

Four double-sided metal cards featuring the IMP logo on the back and the following characters:  Loona Blitz Moxxie Millie Cards come in a folding card pack. Cards measure 2" by 3.5" Design by GasuGuma.

Read more less

**THIS ITEM IS ON PRE-ORDER** THE PRE-ORDER ENDS ON OCTOBER 14th. PLEASE ALLOW 2-4 WEEKS FOR PRODUCTION. NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Contains one 6x4 sticker sheet Each sticker is about 1" tall.Designs by KStone 

Read more less

Design by GasuGuma *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.

Read more less

Design by KStooooneDimensions - approx. 10.5" tallPlush Material - Polyester Adult Collectible; not a toy. Recommended for ages 16+Not for children under 3 years of age.Small Parts, choking hazard.

Read more less

Four double sided metal cards featuring the IMP logo on the back and the following characters:  Moxxie Millie Loona Blitz Cards come in a folding card pack. Cards measure 2" by 3.5" Design by Par0lllel

Read more less

Limit 3 per customer**THIS ITEM IS ON PRE-ORDER** ITEM IS ESTIMATED TO ARRIVE MAY 2025 NOTE: ORDERS SHIP COMPLETE. IF YOU ORDER A PRE-ORDER ITEM AND A REGULAR ITEM YOUR ORDER WILL NOT SHIP UNTIL THE PRE-ORDER IS READY. Design by Andrea Pins are approximately 1 in wide. Enamel material. 

Read more less

Design by Kazuki  24" x 14" Embroidered Edged playmat.   Playmats are made-to-order and can not be exchanged or refunded. Playmats are using Sublimation process. Sublimation printing can cause minor printing imperfections. **All sales are final**

Read more less

Design by MissPanica  24" x 14" Embroidered Edged playmat.   Playmats are made-to-order and can not be exchanged or refunded. Playmats are using Sublimation process. Sublimation printing can cause minor printing imperfections. **All sales are final**

Read more less

Hardshell switch carrying case. Material is EVA and PU.  Dimensions 10.5" x 5" x 1.675"  Case has 2 zippers, upper elastic mesh pocket, 10 gamecard pockets, and double elastic bands to hold in console.  Design by zllm6.

Read more less

Design by Kain. Sizing Charts

Read more less

Design by GasuGuma *NOTE* The standee has a protective film on each side that should be removed before use. The film can be removed by holding one corner of the film and pulling towards you. The protective film is intentionally difficult to remove and may require some force during removal.Limit 3 per customer

Read more less

Hardshell switch carrying case. Material is EVA and PU.  Dimensions 10.5" x 5" x 1.675"  Case has 2 zippers, upper elastic mesh pocket, 10 gamecard pockets, and double elastic bands to hold in console.  Design by Circleheadd

Read more less